Arctic Cooling Accelero L2 Plus

Levertijd: voorradig bij leverancier, levertijd normaliter 1 tot 5 werkdagen.
€ 24,32
  • Klik op de foto voor een vergroting.
  • Klik op de foto voor een vergroting.
  • Klik op de foto voor een vergroting.
  • Toon alle producten van Arctic Cooling.
Merk: Arctic Cooling

EAN code: 0872767004467
SKU code: DCACO-V300101-BL
The Accelero L2 Plus is a cross compatible VGA cooler designed for low end to mid-range graphic cards, same as his predecessor L2 Pro but with a wider compatibility and enhanced RAM and VR cooling. A comprehensive RAM/VR cooling set is also included to improve the cooling performance of RAM/VR.

Cooling Performance
Featuring a 92 mm PWM fan and a cooling capacity of 120 Watts, the Accelero L2 Plus ensures components are performing under ideal temperature. The pre-applied MX-4 thermal compound allows enhanced thermal conductivity from the GPU, thus considerably extending its service life.

Enhanced RAM and VR Cooling
In order to boost the cooling efficiency of RAM and VR, the Accelero L2 Plus comes with the G-1, an electrically non-conductive thermal glue used to affix RAM and VR heatsinks on the VGA board. Unlike generic thermal tapes, the G-1 offers high thermal conductivity with excellent adhesiveness. Moreover, removing the G-1 is extremely easy without leaving any residues.

Virtually Silent
Operated by a low noise impeller enclosed in a patented fan holder to reduce the buzzing sound when the fan is spinning, the Accelero L2 Plus is barely audible even running at full load. To enable minimum noise level at all circumstances, the PWM controller enables the fan to run at the optimal speed according to the load generated by the GPU.

To accommodate a broad range of models, the Accelero L2 Plus comes with a versatile mounting mechanism and an extensive RAM and VR cooling set consisting of 16 pieces of RAM/VR heatsinks in various sizes. Featuring the CrossFire and SLI compatibility the users benefit from the optimized performance of a multi-VGA setup.

  • Max. Cooling Capacity: 120 Watts
  • Heatsink Material: Aluminum
  • Fan (mm): 92 mm, 900 - 2,000 RPM (controlled by PWM)
  • Bearing: Fluid Dynamic Bearing
  • Noise Level: 0.4 Sone
  • Dimensions (Product): 119 (L) x 94 (W) x 51 (H) mm
  • Dimensions (Packaging): 123 (L) x 98 (W) x 55 (H) mm
  • Net Weight: 250 g

  • Heatsink: 16 pcs
  • Screw (M2): 4 pcs
  • Washer: 4 pcs
  • Spacer (4.5 mm): 4 pcs
  • Adhesive Tape: 1 pc
  • G-1 Thermal Glue (1.5 g Grey Compound): 1 bag
  • G-1 Thermal Glue (1.5 g White Compound): 1 bag
  • Mixing Wand: 1 pc
  • 4-Pin Fan Power Adapter: 1 pc
© 2001-2021 Freezing Hardware, genoemde prijzen zijn inclusief 21% BTW